New solutions from HAZET for tight installation spaces

There are bolted connections in tight engine compartments for which standard tools are not designed. For example, in many vehicles from AUDI, SEAT, ŠKODA and VW, the fastening screws of the 4/2-way valve with coolant regulator cannot be reached directly because they are located behind the oil filter.

With the new 1/4" screwdriver joint socket XZN special tool from HAZET, the Remscheid-based manufacturer of quality tools and operating equipment, bolts with an internal XZN M8 serration profile can be easily loosened and tightened again via the fully movable joint with quarter-inch operating tool.

Operation of the handbrake shoe retaining springs on the rear parking brake in various BMW models is equally cramped. Specifically for this purpose, HAZET has a new problem-solver in its range with its new hand brake shoe retaining spring tool 2730-2. The tool is designed for extremely confined spaces. The dip-coated T-handle provides good grip so the retaining spring on the side behind the hub can be easily operated with the 5 mm hexagon socket.

Product details:

HAZET 1/4" screwdriver joint socket XZN

2548G-XZN8

• Operation of the fastening screws of the 4/2 way valve with coolant regulator (note: coolant regulator is located inside the coolant pipe and cannot be renewed individually)

• For working in areas with restricted access and for getting around obstructive edges

• Application e.g. on: 4-cylinder diesel engine (2.0l Common Rail):

AUDI A3 model year 2003-2013, TT model year 2008-2014, A1 model year 2011-2015, Q3 model year 2011-2018,

SEAT Altea model year 2004-2015, Leon model year 2005-2012, Altea model year XL 2006-2015, Alhambra model year 2010-2022,

ŠKODA Octavia model year 2004-2013, Superb model year 2008-2015, Yeti model year 2009-2017,

VW Caddy model year 2010-2015, Eos model year 2008-2015, Golf Plus model year 2008-2015, Passat model year 2010-2017,

Passat CC model year 2008-2016, Scirocco model year 2008-2017, Golf 6 model year 2008-2012, Touran model year 2010-2015,

Beetle model year 2011-2016, Jetta model year 2010-2018, Tiguan model year 2007-2018

• Drive outlet: internal serration profile XZN M8

HAZET hand brake shoe retaining spring tool

2730-2

• Tool is especially suited to areas with very restricted access

• Operation of retaining springs of the hand brake shoes (rear disc brakes)

• Universal use possible in confined spaces due to s 5 mm

• Application e.g. on: BMW E36, E46, E39, E60, E85

• Tool makes it easy to reach the retaining springs on the side behind the wheel hub, as operation

through borehole in the wheel hub is not possible for the above vehicle types

• T-handle with dip-coating

• Total length: 155 mm